[sc-users] psycollider and asio4all

[John Glover]

Sounds like it is booting, what does it say when you send the server a
message (play a simple sine wave for example)?

John

On 03/04/2008, Martin Victory <martin.victory at gmail.com> wrote:
>
> I've done this before with the same hardware setup, when psycollider was
> 061220. Now I can't seem to get it to work with either that version or the
> 3.2 release.
>
> Here is the line from my startup file:
>
> s.options.device_("ASIO : ASIO4ALL v2");
>
> When I boot the server I get this:
>
> booting 57110
> Using vector unit: no
>
> Device options:
>   - MME : Microsoft Sound Mapper - Input   (device #0 with 2 ins 0 outs)
>    - MME : M-Audio Delta AP 1/2   (device #1 with 2 ins 0 outs)
>   - MME : M-Audio Delta AP Multi   (device #4 with 2 ins 0 outs)
>   - MME : M-Audio Delta AP S/PDIF   (device #5 with 2 ins 0 outs)
>   - MME : M-Audio Delta AP Mon. Mixer   (device #6 with 2 ins 0 outs)
>    - MME : Santa Cruz(tm)   (device #7 with 2 ins 0 outs)
>   - MME : Microsoft Sound Mapper - Output   (device #8 with 0 ins 2 outs)
>   - MME : M-Audio Delta AP 1/2   (device #9 with 0 ins 2 outs)
>   - MME : M-Audio Delta AP Multi   (device #12 with 0 ins 2 outs)
>    - MME : M-Audio Delta AP S/PDIF   (device #13 with 0 ins 2 outs)
>   - MME : Santa Cruz(tm)   (device #14 with 0 ins 2 outs)
>   - ASIO : ASIO4ALL v2   (device #15 with 4 ins 4 outs)
>   - ASIO : M-Audio Delta ASIO   (device #16 with 6 ins 4 outs)
>
> Booting with:
>  In: ASIO : ASIO4ALL v2
>  Out: ASIO : ASIO4ALL v2
> suggestedLatency used: 0.012
> SuperCollider 3 server ready..
> ERROR:
> server failed to start
> -----------------------------------------------------------------------
>
>
> Although the error message says that the server failed to start, I can see
> an scsynth.exe in my task manager. And subsequent requests to boot the
> server result in:
>
> Exception in World_OpenUDP: unable to bind udp socket
>
>
>
> Does anyone have any ideas?
>
>
>
>
> _______________________________________________
>  sc-users mailing list
>  sc-users at create.ucsb.edu
>  http://lists.create.ucsb.edu/mailman/listinfo/sc-users
>
>